Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
K487BLU REV A
15
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
3. WING REPLACEMENT:
a) Using a small flat screwdriver, remove the plugs from both pods (See Figure 9).
b) Remove the old wings by raising the wings up toward the sides of the cleaner and lifting them off their hooks (See
Figure 10). If any of the wing hooks are broken, take the cleaner to your Hayward dealer for a pod replacement since
the unit will not function properly if the wings are not securely attached with the pod hooks.
c) Replace the wings making sure that
the “L” (left) and “R” (Right) identifiers on the wings match with the pods
.
d) Replace the pod plugs and tap them into place for a secure fit.
4. FLAP REPLACEMENT:
a) Remove the front and rear flaps from your Hayward Blu cleaner by inserting a small flat screwdriver between the flap
and the lower body near the pivot point of the flaps (See Figure 11).
K487BLU REV A
15
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
3. WING REPLACEMENT:
a) Using a small flat screwdriver, remove the plugs from both pods (See Figure 9).
b) Remove the old wings by raising the wings up toward the sides of the cleaner and lifting them off their hooks (See
Figure 10). If any of the wing hooks are broken, take the cleaner to your Hayward dealer for a pod replacement since
the unit will not function properly if the wings are not securely attached with the pod hooks.
c) Replace the wings making sure that
the “L” (left) and “R” (Right) identifiers on the wings match with the pods
.
d) Replace the pod plugs and tap them into place for a secure fit.
4. FLAP REPLACEMENT:
a) Remove the front and rear flaps from your Hayward Blu cleaner by inserting a small flat screwdriver between the flap
and the lower body near the pivot point of the flaps (See Figure 11).
K487BLU REV A
15
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
3. WING REPLACEMENT:
a) Using a small flat screwdriver, remove the plugs from both pods (See Figure 9).
b) Remove the old wings by raising the wings up toward the sides of the cleaner and lifting them off their hooks (See
Figure 10). If any of the wing hooks are broken, take the cleaner to your Hayward dealer for a pod replacement since
the unit will not function properly if the wings are not securely attached with the pod hooks.
c) Replace the wings making sure that
the “L” (left) and “R” (Right) identifiers on the wings match with the pods
.
d) Replace the pod plugs and tap them into place for a secure fit.
4. FLAP REPLACEMENT:
a) Remove the front and rear flaps from your Hayward Blu cleaner by inserting a small flat screwdriver between the flap
and the lower body near the pivot point of the flaps (See Figure 11).
220318_BluManual_r3.indd 15
1/14/13 1:27 PM
