Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
K487BLU REV A
17
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
f) Remove access cover assembly (See Figures 14 & 15).
g) Remove four (4) “A”
screws (See Figure 13).
h) Lift the lower body assembly off of the Hayward Blu cleaner (See Figure 13).
i) Remove four (4) “B” screws
(See Figure 13).
j) Remove bumper carefully, making sure that other cleaners parts are not moved or disturbed.
k) Replace bumper, again making sure that other cleaner parts are not moved or disturbed.
l) Reinstall screws and parts, following steps in reverse
–
i, h, g, f, e, d, c.
m) Reinstall Hayward Blu cleaner in pool per installation instructions and/or installation video.
K487BLU REV A
17
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
f) Remove access cover assembly (See Figures 14 & 15).
g) Remove four (4) “A”
screws (See Figure 13).
h) Lift the lower body assembly off of the Hayward Blu cleaner (See Figure 13).
i) Remove four (4) “B” screws
(See Figure 13).
j) Remove bumper carefully, making sure that other cleaners parts are not moved or disturbed.
k) Replace bumper, again making sure that other cleaner parts are not moved or disturbed.
l) Reinstall screws and parts, following steps in reverse
–
i, h, g, f, e, d, c.
m) Reinstall Hayward Blu cleaner in pool per installation instructions and/or installation video.
K487BLU REV A
17
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
f) Remove access cover assembly (See Figures 14 & 15).
g) Remove four (4) “A”
screws (See Figure 13).
h) Lift the lower body assembly off of the Hayward Blu cleaner (See Figure 13).
i) Remove four (4) “B” screws
(See Figure 13).
j) Remove bumper carefully, making sure that other cleaners parts are not moved or disturbed.
k) Replace bumper, again making sure that other cleaner parts are not moved or disturbed.
l) Reinstall screws and parts, following steps in reverse
–
i, h, g, f, e, d, c.
m) Reinstall Hayward Blu cleaner in pool per installation instructions and/or installation video.
Figure 14
- Hayward Blu - Concrete
Figure 15
- Hayward Blu - Vinyl
220318_BluManual_r3.indd 17
1/14/13 1:27 PM
