Hayter Powertrim 407F Скачать руководство пользователя страница 3

3

17395

79 

Hayter Limited

 warrants to the original user / purchaser that this unit shall be free from defects in

material and workmanship under normal use and service for a period of 

three years 

from the

date of purchase. The manufacturers of the engine and battery pack system (where applicable)

furnish their own warranty and services are provided through their authorised network (Refer to

“Engine/Battery Pack Warranty Statement”). To qualify for the full benefit of the warranty, the war-

ranty registration card must be returned within 60 days of purchase. Subject to the conditions and

exclusions noted in this limited warranty, we shall at our option, repair or replace any warranted

part during the applicable period. If you are in doubt or experience any difficulty, please consult a

Hayter

 Authorised Service Dealer for clarification..

To qualify for the extended warranty (second and third year) of the three year limited warranty, the

machine must have annual services carried out by an Authorised Hayter Service Dealer. These

chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear

and tear e.g. tyres, wheels, cutterbars, cables, batteries and other consumable wearing parts.
All consumer machines which are fitted with a 

genuine

 Hayter friction disc as original equipment,

before use, are covered by a 

Lifetime Warranty

 against the engine crankshaft bending. 

Note:

friction washers, blade brake units and other such devices are not applicable. Only machines

fitted with a 

genuine

 Hayter friction disc, which are used in accordance with the recommended

operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused

or used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does

not cover minor mechanical adjustments unless they are due to defective materials or workman-

ship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for assistance when

making these adjustments.

A warranty period of 90 days applies to machines used for commercial purposes.

To make a warranty claim, return the unit to a

 Hayter

 authorised dealer along with proof of pur-

chase stating the machine serial number and date of purchase. The service receipt(s) or this

Owner’s Handbook with the 1st/2nd year service boxes fully completed, must be produced as

proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in

this limited warranty, the authorised dealer will, at our option, repair or replace any warranted part

within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to

which you may be entitled and your statutory rights are not affected by this warranty. If you need

additional  information  concerning  this  written  warranty,  or  assistance  in  obtaining  services,

please write to: 

HAYTER LIMITED, 

Service Department, 

Spellbrook, 

Bishop’s Stortford, 

Hertfordshire. CM23 4BU

LIMITED WARRANTY

1st Year
Service
Record

2nd Year
Service
Record

Date . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . 

Signed . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . .

Date . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . 

Signed . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . .

Содержание Powertrim 407F































Отзывы: