manualshive.com logo in svg

Haybuster Balebuster 2564, Руководство по эксплуатации

Поделиться
Скачать
Haybuster Balebuster 2564 Скачать руководство пользователя страница 30

20

2 5 6 4   B A L E B U S T E R

O P E R A T I N G   I N S T R U C T I O N S

3.3.2

Hitching the BALEBUSTER to a tractor

To hitch the BALEBUSTER to a tractor, perform the following steps:

1.

Adjust jack for tractor height

2.

Position tractor so hitch pin can be installed, and
install the hitch pin.

3.

Adjust jack so that the jackstand is loose.  Then
place jackstand in the raised and locked position.

4.

Attach PTO to tractor.

5.

Clean off the hydraulic hose ends and tractor
couplings, then attach the hydraulic hoses.

6.

Verify hydraulic hoses are hooked up in proper
orientation.

7.

Raise loading table before moving.

3.3.3

Starting the machine

WARNING: 

 After making all necessary hook-ups to tractor, be sure rotor chamber is clear of any

solid objects.  Make sure any bystanders are away from discharge before engaging PTO.  Flying
objects can cause serious injury or even death.  Stay clear of discharge side of machine unless
operator has stopped tractor engine and machine has stopped rotating.  Failure to follow these
instructions may result in severe injury.

To start the machine, perform the following steps:

1.

Machines hydraulic system performs two (2) functions.  One function raises the bale loader for loading
bales into the machine.  The second function powers bale conveyor by means of a hydraulic motor.

2.

Operating tractor PTO at 1000 RPM allows machine to do a better job of chopping forage and also keeps
a minimum of twine build-up on the rotor.  Twine build-up should be kept to a minimum to reduce fire
hazard.

3.

Always operate bale conveyor to rotate the bale in direction indicated by arrow on the front shield.
Reverse direction only if the bale is lodged or hesitates to turn

4.

CAUTION:

   Serious injury could result if machine is allowed to tip.

front jack stand
(hitched position)

PTO

Содержание Balebuster 2564





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды