Haybuster Balebuster 2564, Руководство по эксплуатации

Страница: 27 / 132

2 5 6 4 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
17
3.2 Introduction to the machine
3.2.1 Operator controls
Operator controlled items:
• The loading tines, to load the bale. See section 3.3.6, “Loading”
• The PTO shaft, which runs the fan, auger, and rotor.
• The bale conveyor chain.
Adjustable items:
• The conveyor speed control valve. See section 3.4.4, “Adjusting the bale conveyor speed”
• Slug bar setting
• Screen size
• Spout and spout deflector settings
3.2.2 Bale conveyor
The Bale conveyor keeps the bale moving into the flails,
forcing the bale to rotate, and keeping product in front of
the flails
Bale conveyor speed is set with the conveyor speed control
valve or tractor controls if equipped with a PFC system.
To chop the forage finer, decrease the conveyor speed by
rotating the control lever up and to the left. For a coarser
cut, increase the conveyor speed by rotating the lever to the
right and down.
3.2.3 Rotor
The rotor flails shred the bale and throws the material into the augers. Rotor speed should remain constant, which is
done by keeping the tractor PTO at 1000 RPM.
bale conveyor
speed control
valve