manualshive.com logo in svg

Haybuster Balebuster 2564, Руководство по эксплуатации

Поделиться
Скачать
Haybuster Balebuster 2564 Скачать руководство пользователя страница 12

2

2 5 6 4   B A L E B U S T E R

O P E R A T I N G   I N S T R U C T I O N S

Introduction

Appropriate use of unit

Your model

 

2564™ BALEBUSTER™ is designed to load and shred most types of baled livestock forage.  It is designed

specifically for use on 6 foot. diameter round bales weighing up to 2,000 pounds and 5-1/2 feet in length

NOTE:  

To avoid possible damage to the machine and risk of injury to the operator, consult with a

DuraTech Industries International, Inc. (DuraTech Industries) representative before attempting to
shred materials other than livestock forage.

The 2564 BALEBUSTER has multiple uses:

•

Laying forage windrows in open fields.

•

Filling feed bunks - fenceline, circular etc.

•

Spreading straw for livestock bedding.

•

Spreading mulch over perennial plants, such as strawberries, mushrooms, etc.

•

Spreading mulch over reclaimed land areas.

•

Spreading mulch over sugar beets for storage.

Purpose

The purpose of this owner’s manual is to explain maintenance requirements and routine adjustments for the most
efficient operation of your 2564 BALEBUSTER.  There is also a trouble shooting section that may help in case of
problems in the field.  Any information not covered in this manual may be obtained from your dealer.

SPECIAL NOTE:  

When reference is made as to front, rear, left hand, or right hand of this

machine, the reference is always made from standing at the rear end of the machine and
looking toward the hitch.  Always use serial number and model number when referring to
parts or problems. Please obtain your serial number and write it below for your future
reference.

MODEL:

 2564 BALEBUSTER

 SERIAL NO.

________________________

Содержание Balebuster 2564





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды