Haybuster Balebuster 2564, Руководство по эксплуатации

Страница: 20 / 132

10
2 5 6 4 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
DURING OPERATION
Enforce the following safety precautions and others contained in this manual to prevent serious personal injury.
• Everyone must be kept clear of work area except operator seated at tractor controls.
• Disengage PTO before starting engine.
• Never work on or near BALEBUSTER unless engine is shut off and flails have stopped.
• Keep shields in place and in good condition.
• Watch out for and avoid any object that might interfere with the proper operation of the machine.
• Power takeoff shafts must be locked in place with protective PTO shields in place.
• Keep hands, feet and clothing away from power driven parts.
• Never leave tractor controls unattended while the engine is running.
• Exercise extreme care when operating on rough and/or steep terrain. Avoid operation on terrain which is
excessively rough or steep.
• Make surer your tractor PTO speed never exceeds 1000 RPM.
WHEN PERFORMING SERVICE AND MAINTENANCE
CAUTION: Before performing any maintenance or adjustments make sure machine is NOT
running. If for any reason arc welding is to be done, always ground the welder close to the point
where the welding is being done. It is recommended that the rotor be grounded to frame of machine
to prevent arcing on bearings.
• Before working on or near the BALEBUSTER for any reason, including servicing, cleaning, unplugging
or inspecting machine, use normal shut-down procedures unless instructed differently in this manual.
• Use only replacement parts that are provided by DuraTech Industries.
• If it is necessary to operate the tractor engine indoors for more than a few seconds, be sure to provide
enough ventilation to remove the tractor exhaust fumes.
• Relieve all pressure in the hydraulic system before disconnecting the hose or performing other work on
the system. Make sure all connections are tight and the hose is in good condition before applying
pressure to the system.
WARNING: Hydraulic fluid escaping under pressure can be visible and have enough force to
penetrate the skin. When searching for a suspected leak, use a piece of wood or cardboard rather than
your hands. If injured, seek medical attention immediately to prevent serious infection or reaction.
• Never work on the BALEBUSTER with the bale loader in the raised position. Lower the bale
loader to ground level.
• Check for loose or badly worn bolts or connectors.