17
ASSEMBLY AND USE
1. Unpack
a.Unpack all parts and lay them on a flat, stable surface.
b.Remove all packing materials and shipping devices if
applicable. Make sure the delivery contents are complete
and free of any damage. If you find that parts are missing
or show damage do not use the product but contact your
dealer. Using an incomplete or damaged product represents
a hazard to people and property.
c.Ensure that you have all the accessories and tools needed
for assembly and operation. This also includes proper
personal protective equipment.
d.Disconnect the spark plug connector from the spark plug.
WARNING! Be careful with small parts that
are removed during assembly or when making
adjustments. Make sure you do not lose them.
2. Assembly
a. AUXILIARY HANDLE ASSEMBLY
1)Loosen the outer pre-assembled screws on the auxiliary
handle.
2)Align the step guard with the screw to one of the holes in
the shaft and insert the shorter screw into the hole. Tighten it
with the cross head screwdriver.
3)Place the handle onto the shaft from the top and secure it
with the longer screws. Tighten them with the hex key.
NOTE: There are holes on the bottom side of the upper
shaft above the clamp to adjust the position of the handle.
b. Adjusting The Handle
1)Loosen the bolts on the auxiliary handle and adjust the
position.
2)Afterward tighten the bolts.
