Hawking Net-Vision HNC700PT, Руководство пользователя

Страница: 56 / 77

Management & Control Software User’s Manual
- – 4-55
high : Event will be triggered when the digital input is high.
low : Event will be triggered when the digital input is low.
rising : Event will be triggered if the digital input changes from low to high.
falling : Event will be triggered if the digital input changes from high to low.
4.3.4 Schedule in Continuous mode
Figure 4-10 shows that if you have selected the Continuous mode then it will record
continuously according to the schedule set up by the user.
4.4 Secondary Schedule
Secondary schedule is the time that is outside the Primary schedule.
4.4.1 Schedule modes
Figure 4-13 Secondary Schedule Mode Selector
There are three selections in the Secondary schedule mode selector: Disable, Event
mode, and Continuous mode. You can disable the Secondary schedule, choose the
Event mode or choose the Continuous mode. The two modes are the same as those
in the Primary schedule. Please refer to Section 4.3.3 and Section 4.3.4.