86
Here are descriptions of every setup items:
Enable Port
Check this box to enable port mapping,
Forwarding (1):
and uncheck this box to disable port mapping.
Private IP (2):
Input the IP address of the computer on local network which
provides internet service.
Computer Name (3):
Pull down the menu and all the computers connected to the
router will be listed here. You can easily to select the
computer name without checking the IP address of the
computer.
Type (4):
Select the type of connection, TCP or UDP. If you’re not sure,
please select ‘Both’.
Port Range (5):
Input the starting port number in the left field, and input the
ending port number in the right field. If you only want to
redirect a single port number, just fill the port number in the
left field.
Comment (6):
Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add (7):
Add the mapping to port forwarding table.
Reset (8):
Remove all inputted values.
Port Forwarding
All existing port forwarding mappings will be displayed here.
Table
(9):
Delete Selected (10):
Please select a port forwarding mapping by clicking the
‘Select’ box of the mapping, then click ‘Delete Selected’
button to remove the mapping. If there’s no existing mapping,
this button will be grayed out.
Delete All (11):
Delete all mappings existed in virtual server table.
Reset (12):
Unselect all mappings.
Содержание HWRN2
