60
2-7-1-5 Setup procedure for ‘AP Bridge – WDS’
In this mode, you can expand the scope of network by combining up to
four other access points together, and every access point can still accept
wireless clients.
Here are descriptions of every setup items:
Band (2)
Select the band you want to use, all the wireless routers must
use the same setting.
ESSID (3)
Input the ESSID of your wireless router, the setting should be
the same with other wireless routers for the convenience of
roaming.
Channel Number (4)
Select the channel you want to use, all the wireless
routers must use the same setting.
1
2
3
4
5
7
8
6
9
10
NOTE: For WDS mode, the output signal nature is the same as that of
normal AP mode.
Содержание HWRN2
