49
2-6-2 DHCP Server:
These settings are only available when ‘DHCP Server’ in ‘LAN IP’
section is ‘Enabled’, and here are descriptions of every setup item:
Lease Time (1):
Please choose a lease time (the duration that every computer
can keep a specific IP address) of every IP address assigned
by this router from dropdown menu.
Start IP (2):
Please input the start IP address of the IP range.
End IP (3):
Please input the end IP address of the IP range.
Domain Name (4):
If you wish, you can also optionally input the domain name
for your network. This is optional.
Recommended Value if you don’t know what to fill:
Lease Time: Two Weeks (or ‘Forever’, if you have less than 20 computers)
Start IP: 192.168.1.100
End IP: 192.168.1.200
Domain Name: (leave it blank)
NOTE:
1. The number of the last field (mentioned ‘d’ field) of ‘End IP’ must be
greater than ‘Start IP’, and can not be the same as router’s IP address.
2. The former three fields of IP address of ‘Start IP’, ‘End IP’, and ‘IP
Address of ‘LAN IP’ section (mentioned ‘a’, ‘b’, and ‘c’ field) should be the same.
3. These settings will affect wireless clients too.
1
3
4
2
Содержание HWRN2
