w w w . h a w k e y e e l e c t r o n i c s . c o m
6. The
and indicators will now be illuminated to indicate that a shallow
water alarm is set.
When triggered, the alarm sounds an audible buzzer for ten seconds while
flashing the warning LED and the
and
icons on the display. After 10
seconds, the audible alarm mutes and the warning LED and the
and icons
continue to blink until the depth increases, or the alarm is reset. To reset the
alarm repeat steps 1 thru 5.
N
OTICE
:
Each time the Shallow Water Alarm setting is changed you must wait 5
seconds for the depth finder to return to the Normal Operation Mode in
order for the setting to be saved?
DEEP WATER ALARM
The deep alarm function can be set for depths ranging from 3 to 200 feet and
triggers an alarm when the depth is more than the setting. You must be in the
“Depth Sounder” mode to adjust this setting.
To set the DEEP ALARM (lower alarm):
1. Press the "DOWN" key to access the deep
water alarm setting. The icon will illuminate
and the
indicator will blink
.
•
On depth finders with temperature,
press and hold BOTH the “UP” &
“DOWN” key for approximately 3
seconds until the
, , &
icons blink,
release the keys and Press the
“DOWN” key once
2. Pressing the "UP" key will increase the selected value. Pressing the "DOWN"
key will reduce the value.
3. Pressing and releasing the key will change the value in 1-foot increments per
second.
4. Holding down the key will change the value in 9 foot increments per second.
5. After the desired setting is achieved, the display will return to normal
operation after 5 seconds.
6. The
and indicators will now be illuminated to indicate that a deep water
alarm is set.
When triggered, the alarm sounds an audible buzzer for ten seconds while
flashing the warning LED and the
and
icons on the display. After 10
seconds, the audible alarm mutes and the warning LED and the
and icons
