w w w . h a w k e y e e l e c t r o n i c s . c o m
increases, the problem can not usually be completely solved by position only.
Changing one of the sounders to another model that runs on a different
frequency will solve the problem.
Using A Non-Standard Transducer:
You may be able to use a transducer that is currently installed in your watercraft
or a specialized transducer. You need to be sure that the transducer runs on 200
Khz and is able to put out 250 watts of transmitting power. If you are unsure of
the specifications, please contact the manufacturer. If you need to attach a non-
standard transducer to the Digital Depth Sounder display, order part # ACC-DF-
1147 from our website hawkeyeelectronics.com. Strip back the rubber cable
cover 1”
(28 mm)
exposing the internal wires on your transducer. Using a
soldering iron, solder the wires to the corresponding wires on your transducer.
Using electrical tape, or heat shrink tubing make certain that the soldered
connections are completely sealed and protected against accidental electrical
interference and corrosion. Cutting the plug off the Digital Depth Sounder display
will void the warranty.
Poor Performance:
If you are not happy with the performance of your depth sounder, please visit our
support center at support.norcrossmarine.com technical support. Rest assured
that this depth sounder is engineered to the highest standards and is part of the
best selling family of depth sounders in the world. It is highly likely that your
dissatisfaction is due to improper installation and/or setup and our technical
support resources can get your system working properly.
REPL ACEM ENT PART S
Individual components are not available for sale on our website. If you need
replacement parts, please email our customer service department.
WARR ANTY
This device is covered by a 2 Year Limited Warranty. To be eligible for warranty
coverage, you must register your product within 15 days of purchase. Visit our
website for warranty details and to register.
•
To Activate Your Warranty:
•
Read and print out a copy of the warranty details for your records.
•
Complete the registration form our website.
•
Make a copy of your original purchase receipt and staple it to this manual
.
(You will need to present it in the rare occurrence that you need to send
your product in for service.)
•
Complete the information below and store this manual in a safe place.
(
You can print additional copies of this manual from our website.)
