www.havis.com • 1-800-524-9900
4
9
Operation - Docking
(continued)
3)
Pivot tablet so the top pushes against the Docking Station’s rubber
bumpers. While holding the Tablet firmly against the bumpers, pull
forward and down on the Latch Handle to secure tablet in place.
NOTE:
The Latch Handle will drive the Latch Hook over the front of
the tablet. Pull Latch Handle until it snaps into position.
Port Replication Capability
2)
Hold tablet in landscape orientation, with bottom angled toward the
Docking Station, aligning the Tablet’s Docking Connector with the Docking
Station’s Docking Connector. Lower tablet into the bottom of the Docking
Station while ensuring that the alignment grooves are aligned with the
Docking Station’s Alignment Posts.
TOP
of Docking Station
BOTTOM
of Docking Station
Ethernet
(RJ45)
USB 3.0
(x2)
HDMI
Serial DB9
(Non-Native)
VGA
(D-Sub 15 pin)
Antennas
(ANT. A / ANT. B)
A
B
Power Input
(16V DC IN)
Int/Ext
Antenna Switch
NOTE: Antennas only available on select Docking Station models (DS-PAN-701-2, DS-PAN-702-2)
Parts Included
Hardware Kit
This Hardware Kit includes:
1. Zip Ties (6)
2. Keys (2)
3. M4 x 0.7 x 12mm long
Pan Head Screws (7)
4. Washers, M4 (10)
5. Lock Washers, M4 (5)
6. Zip Tie Mounts (2)
Extra hardware provided
Tools required for installation:
• #2 Philips Screwdriver
(For attaching Docking Station to VESA 75mm hole pattern
equipment with Pan Head M4 x 0.7 x 12mm Screws)
1)
Ensure Docking Station is unlatched by lifting Latch Handle.
Antenna Identification
(DS-PAN-701-2, DS-PAN-702-2)
In reference to the Panasonic FZ-G1
Upper/Lower Antenna connections
• HAVIS ANTENNA
A
= PANASONIC LOWER
• HAVIS ANTENNA
B
= PANASONIC UPPER
A
B
