Installation
Installation of Power Supply (Optional)
www.havis.com • 1-800-524-9900
7
8
4
1). Power off computer, disconnect all cables from computer.
2). Using Havis LPS- 103 (120W power supply) connect
output cable of power supply to input of docking station.
3). Place LPS- 103 power supply where convenient and safely
affix using either LPS-202 bracket kit or cable ties.
5). Route and strain relieve input and output cables to
enable motion where necessary and anchor to
prevent damage from pinching, kicking, yanking, etc.
1). Remove the mounting bracket from the docking station.
Next install the bracket to the motion device using (3) 1/4“-
20 button head screws (supplied). Torque screws to 13.4Nm
(120 in-lbs) ± 10%.
2). Install the docking station to the mounting bracket using
(4) M5 button head screws (supplied). Torque screws to 2.8
Nm (25 in-lbs) ± 10%.
NOTE:
LPS-202 allows for mounting of
power supply on either right hand or
left hand side of docking station.
LPS-202
LPS-103
NOTE:
It is recommended to use a drop
of medium strength (blue) thread
locking adhesive applied to the
threads of the fasteners.
1/4” - 20 Screws (3)
Mounting Bracket
Typical Motion
Device Example
M5 Screws (4)
