Cable Management
www.havis.com • 1-800-524-9900
5
6
Cable Management - Continued
1). Tip the dock to a position that is comfortable to
work with.
2). Install all cables that are necessary for computing needs.
3). Use tie wraps through integral loops in rear of dock to
strain relieve connectors.
4). Gather all cables to one side and tie off to unused holes
on underside of dock.
5). Create a service loop with cables to ensure that no
tension is on the connectors and to enable intended motion.
6). Tie off cables onto a stationary part of the
mounting system.
7). Add additional ties as needed to secure cables.
Tie off on stationary part
of the mounting system
Integral loops for
strain relieving
This loop must be large
enough to allow full range
of rotation and extension
without yanking connections.
Use as many ties as necessary
to protect each connection
Tie off to bracket
