EN
EN
EN
ECOVIEW / ECOVIEW S
27
26
ECOVIEW / ECOVIEW S
4. MAINTENANCE
3. OPERATION
Remember that to link your mobile device with your radiator you must:
Press
and turn the knob in AUTO position
NOTE 7
3.5 DISCONNECTING THE MAINS SUPPLY / SUPPLY CUT OFF
If the radiator is kept disconnected from the mains or if there is a mains supply cut off for more
than 2 hours, YOU MUST UPDATE THE CLOCK AND THE DAY OF THE WEEK.
The rest of the programmed parameters (temperatures and programming) are kept in memory.
TO UPDATE THE CLOCK AND THE DAY OF THE WEEK:
If you have downloaded the “Haverland BT” App,
link your mobile device to your radiator (follow the
previous point 6) and click on the App
.
The clock and day will be updated via the internet.
4. MAINTENANCE
Your device does not require any type of special maintenance.
You need only clean any dust that may accumulate with a dry and soft cloth.
We advise that you clean any accumulated dust from the radiator surface at the beginning
of the winter season.
NEVER USE SOLVENTS OR ABRASIVE PRODUCTS.
NOTE 8
3.5 ITCS INTELLIGENT FUNCTION
The radiator incorporates an innovative ITCS smart temperature control system.
This system activates the start-up of the device in advance of the scheduled time (2
hours maximum), ensuring that the desired temperature is achieved at the specified time and
following the weekly schedule set.
This intelligent function is only available in AUTO mode.
3.6 ”OPEN WINDOW” FUNCTION
This function is activated when there is a sudden drop in the temperature in the room.
When closing the window, the radiator will detect a temperature rise or turn the thermostat
control knob to the left and turn again the thermostat control know to the AUTO position
and
this function will be deactivated. The radiator will switch on again, returning to the state before
the disconnection.
NOTE 9
When this function is activated, the “In operation” Indicator LED appears on blue
(Anti-freeze Mode).
The radiator will be switched off avoiding unnecessary energy consumption.
NOTE 10
This intelligent function is only available in AUTO mode.
4. MAINTENANCE
