© Copyright 2015 by HAVER & BOECKER
Page 19/37
6. Description EML 200 Premium Remote
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Nut with handlebars
Inspection glass
Cover
Rubber buffer
Test sieve set
Guide rod
Oscillation magnet
Rubber profile for vibration body
Base cover
Vibration body
Vibrating plate
Leaf spring
Base plate
Separate control unit
Rubber ring
Sieve pan with outlet
Counter nut
Full cone nozzle
Cover sheet
The EML 200 Premium Remote is also suitable for dry-sieving.
The cover with full cone nozzle may be used as well for wet as for dry sieving
– or it can be changed
against a cover without nozzle. We recommend to change the sieve pan with discharge nozzle (16)
against a sieve pan for dry sieving.
7. PC
– Connection
For data transfer the EML 200 can be connected with a personal computer by its serial interface. An
Ethernet cable is not included in delivery. Insert the IP-
address under „settings“.
The serial interface of the EML 200 Premium is located at the backside of the drive. The serial interface of
the EML 200 Premium Remote is located at the separate control gear.
This enables the communication to report the analysis with the Haver software analysis or any other
laboratory information and management system (LIMS).
Serial interface at the bottom of the separate control gear
