11
IMPORTANT SAFETY INSTRUCTIONS
TABLE OF CONTENTS
SCHEMATIC DRAWING
p.9
p.10
p.11
p.12
p.13
p.13
p.14
p.15
MAINTENANCE
p.13
IMPORTANT SAFETY INSTRUCTIONS
FUNCTIONAL DESCRIPTION
ASSEMBLY
OPERATION
SAFETY INSTRUCTIONS FOR ELECTRIC MIXER
PARTS LIST
SPECIFICATIONS
p.15
WARRANTY
ENGLISH
WARNING!
Read and understand all instructions. Failure to follow all instructions
listed below may result in serious personal injury.
WARNING!
When using electric tools, machines or equipment, basic safety
precautions should always be followed to reduce the risk of fire, electric shock, and
personal injury. Completely read the manual before proceeding to use this tool. KEEP
THESE INSTRUCTIONS.
WORK AREA
1. Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust.
Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
ELECTRICAL SAFETY
4. Double Insulated tools are equipped with a polarized plug (one blade is wider
than the other.) This power plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlet. Do not change the
plug in any way.
Double Insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
5. Avoid body contact with grounded surfaces such as pipes, radiators, ranges
and refrigerators.
There is an increased risk of electric shock if your body is
grounded.
6. Don’t expose power tools to rain or wet conditions.
Water entering a power tool
will increase the risk of electric shock.
7. Handle the cord carefully.Never use the cord to carry the tools or pull the plug
from an outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately.
Damaged cords increase the risk of electric
shock.
8. When operating a power tool outside, use outdoor extensions cord marked
“W-A” or “W”.
These cords are rated for outdoor use and reduce the risk of electric
shock.
PERSONAL SAFETY
9. Stay alert, watch what you are doing, and use common sense when operating
a power tool. Do not use tool while tired or under the influence of drugs,
alcohol, or medication.
A moment of inattention while operating power tools may
result in serious personal injury.
10. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing,and gloves away from moving parts.
Loose clothes, jewelry,
or long hair can be caught in moving parts.
!
!
