Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid.
Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, [email protected] • Errors and technical changes reserved.
...convincing solutions
english
5.
Removing and inserting the battery
Hold the tool firmly and press the battery release button to remove the battery.
ATTENTION:
Never short-circuit the battery.
Inserting the battery
Insert the battery until it clicks into place. Make sure the poles are facing the right way
.
Charging
Before using the tool, charge the battery as follows: Connect the cable of the charger to a
socket (AC).
Inserting the battery into the charger
Insert the battery firmly, as shown in here
until it touches the bottom of the charging
compartment.
ATTENTION:
If the battery is inserted incorrectly, it will not only not be charged, it may also damage the
charger (e.g. by bending the terminals/short-circuiting).
Charging
When you insert a battery into the charger, the battery is charged
and the charging light.
When the battery is fully charged, the charging indicator shows 100% and a beep.
Remove the battery immediately and disconnect the charger from the mains.
Attention!
Please remove the battery during transport and after
usage – because of avoiding deep discharge!
