Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid.
Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, [email protected] • Errors and technical changes reserved.
...convincing solutions
english
3. Short description
Preparation:
Before starting up the tool, always read the operating instructions.
All current-carrying elements in the area you are working in should be disconnected.
Otherwise the protective procedures for working in the vicinity of components under current
must be implemented. (DIN EN 50110)
Do not use the tool if you are tired or under the influence of medication, drugs or alcohol.
Take into account the valid accident prevention and safety regulations and use the tool exclu-
sively for the purpose for which it is intended.
Only electro-technically trained persons over 16 years of age may process connecting materi-
als using the tool.
The operating instructions must always be carried with the tool.
The instructions must have been read and understood by the user.
The operator must ensure that this is the case.
Handling
:
•
The device has a manual return that brings the piston back to the starting point when
the maximum cutting force (separation of the cable) has been achieved.
•
Particularly excellent circular cut
•
Use under the harshest conditions possible - robust construction.
Rotary knife
Pushbutton
Safety lever
