Haulotte HA100JRT, Руководство оператора

Страница: 93 / 122

A
B
C
D
E
F
G
H
I
93 4000328850 E 12 14 USA / GB
D
- Operation instructions
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
8.4.2 - Re-engaging the drive hubs
After repairing the machine, re-engage the wheel drive hubs.
1. Loosen and remove the 2 fastening screws ( 1 ).
2. Remove the clutch stop ( 2 ).
3. Turn the clutch stop so that its domed part is towards the exterior of the wheel gears.
4. Attach the clutch stop.
5. Check the wheel gear oil level.
8.5 - S
TORAGE
When the machine is in elevated position, it is necessary to regularly switch the power ON to
ensure that the security systems are active.
Machine must be parked in a protected/designated area with the boom in a stowed
configuration, however the boom can be raised but must not be extended. Make sure there is
no load in the platform.
It is recommended that the machine is not stored or immobilized unfolded; to avoid
jeopardizing the safety of people and property.
Ensure all access panels and doors/covers are shut and secured.
"Turn the energizing key selector switch ( 18 ) at the ground control box to the ""left"" to shut
OFF the power".
Ensure that the turntable rotation locking pin is removed and stored properly.
Remove the key switch to prevent unauthorized operation of the machine.
Storing the machine in stowed position with an obstacle under the boom is forbidden.