Haulotte HA100JRT, Руководство оператора

Страница: 67 / 122

A
B
C
D
E
F
G
H
I
67 4000328850 E 12 14 USA / GB
C
- Pre-operation inspection
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
4.12 - R
ADIUS LIMITATION
N.B.-:-T
HE PRESENCE OF THIS DEVICE DEPENDS ON THE MACHINE CONFIGURATION
.
The radius limit indicator flashes to indicate that a controlled movement has occured to
maintain the machine within the stability limit.
Movement is slowed down.
Driving and other additional movements are forbidden.
The radius limit indicator is ON constantly if the operator requests a movement that causes the
machine to exceed the radius limit.
For machines over 40 m(131 ft2 in), the red markers located on the telescope are a visual
means of checking that the radius limit function is working properly.
4.13 - A
XLE EXTENSION
Axle extension improves machine stability.
If the axles are retracted, the machine's capacities are reduced.
Only the following movements are possible :
• Turntable rotation if the boom is in horizontal position.
• Boom raising if the turntable is aligned with the axis.
If the axles are extended, all movements are possible.
Axle extension is possible if the machine is completely stowed, the jib below horizontal position
and the turntable aligned with the axis.
4.14 - D
RIVE BUZZER
For Russia and the Ukraine only :
Each travel or lifting movement activates a buzzer (horn).
4.15 - B
OOM CONTROL SYSTEM
For HA41PX-NT (HA130JRT-NT) only
Machine stowed, extend the telescope from the
platform control box.
Telescope extension must stop as soon as the 1 red
stop on the right side of the telescope is visible.
If telescope extension continues once the 1 red stop is
visible, stop telescope extension immediately.
Contact HAULOTTE Services® to repair the system.
Place barriers around the perimeter of the work area.
Never use a faulty machine