manualshive.com logo in svg

Haulotte HA100JRT, Руководство оператора

Поделиться
Скачать
Haulotte HA100JRT Скачать руководство пользователя страница 12

12

 4000328850 

E 12 14 

USA / GB

HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT

A

- Foreword

 2.1.3 - Overturning / Tip-over Hazards

•  Always keep your feet firmly on the floor of the platform. 

•  Do not sit, stand, or climb on the platform guard rails. 

• Work only within the platform guardrails area and do not lean over

guardrails to perform work. 

•  Do not exit the platform until it is in the completely stowed position. 

•  Do not use the guardrail as a means of access to climb in or out of the

platform. 

Before positioning and operating the machine : 
•  Ensure that the surface is capable of supporting the machine weight

including the rated capacity. 

•  Do not exceed the maximum rated capacity that includes the weight of

both material and allowed number of occupants. Do not exceed the
allowable number of occupants. 

•  Place the loads uniformly distributed on the platform floor. 

•  Do not increase the working height (using extensions, ladder, etc.). 

•  Do not place ladders or scaffolds in the platform or against any part of

this machine. 

•  Do not use the machine in winds exceeding the permissible limit. 

•  Do not increase the surface area of the platform exposed to wind. This

includes adding panels, mesh, banners.  Be aware when working with
materials with a large surface area. This will add to the wind load on
the machine. 

•  Do not raise the platform or drive with platform elevated on an incline

exceeding the rated slope for the machine. 

•  Do not drive the machine on slopes or grades exceeding the specified

limits. 

• Do not replace components critical to stability with components of

different weight or specification. 

• Do not use the machine with material or objects hanging from the

guardrail or the boom. 

•  Do not pull or push towards any object outside of the platform. Do not

exceed the maximum allowable side force stated in the performance
specifications. 

•  Do not use the machine to support any external structure. 

•  Do not use the machine to tow other machines or to drag materials. 

Содержание HA100JRT



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды