Haulotte Group STAR 13 P, Книга по эксплуатации

Страница: 88 / 136

88 4000562980 E 07.16 USA / GB
Electric
Battery (ies)
MS0113
Start-up is automatic as soon as the mains connection is established. The charger is fitted with a LED indicator placed
near the special holding frame :
• Green indicator : Battery charged 100 %
• Yellow LED : Battery charged 80 %
• Red LED : Charger in the intitial charge phase
When there is a fault, the LED indicator flashes in various colours depending on the type of alarm :
In case of an alarm, the charger stops supplying power
During charging :
• The machine's electric system is automatically deactivated while the external power supply is connected to the
machine
• Ensure that the battery are at a temperature not exceeding 45 °C(113 °F) (be careful in summer or in places with a
high ambient temperature)
• Do not remove or open the caps on the elements.
Charge interruption :
• To turn off the charger, disconnect it from the mains.
• Should the machine need to be operated during a charging cycle, first diconnect the charger. This may reduce the
life span of the batteries. Re-connect the charger once the operation is over.
After charging :
• Top up the electrolyte level, if necessary.
• Avoid overflowing.
• Wash the top of the batteries without removing the caps.
• Dry with compressed air or clean cloths.
• Oil the terminals.
State of flashing indicator Type of alarm Description (Action)
Red Battery presence
Battery not connected or not compliant : Check connection or
rated voltage.
Yellow Temperature probe
Temperature probe disconnected while charging or outside the
functional range : Check connection and measure battery
temperature.
Green Specified time
Phase 1 or 2 is longer than the maximum allowed time :
Check battery capacity
Red-Yellow Battery current Loss of output current control : Faulty control logic.
Red-Green Battery voltage
Loss of output voltage control : Battery disconnected or faulty
control logic.
Red-Yellow-Green Temperature Overheating of semiconductors : Check fan operation.
When the charger is connected to the mains for more than 48 h (hours), a new charging cycle starts up at
the end of the previous charging cycle in order to offset self-discharge.