Haulotte Group STAR 13 P Скачать руководство пользователя страница 12

Страница: 12 / 136

4000562980

E 07.16

USA / GB

STAR 6 P - STAR 13 P

- Safety

Never leave the hydraulic cylinders fully extended before switching off the machine, or when stationary
for an extended period of time. Keep the elements of the machine in configuration of maintenance
thanks to mechanics devices.

Report that the machine is under maintenance by tagging the platform and ground control boxes.

Note :
• Using the machine during maintenance is strictly forbidden.

• Do not climb onto the covers.

• The handling of parts must be carried out using appropriate equipment (Chains, Lifting slings, Lifting

anchors).

• Plug the end of any hoses removed, and cap any open ports to prevent contamination during

maintenance.

1.2 - UNCONTROLLED MOVEMENT HAZARD

Be aware of uncontrolled movement and always respect the following :
• Maintain clearance from high voltage lines.

• Maintain clearance from generators, radar, electromagnetic fields.

• Never expose the batteries or electrical components to water (high pressure washer, rain).

• Never tow the machine over extended distances.

• In case of a machine breakdown, it is possible to tow short distance to load it onto a trailer.

• Never leave the hydraulic cylinders fully extended before switching off the machine, or when

stationary for an extended period of time.

• Put the machine in stowed position.

• Select a safe parking location, on a firm level surface, clear of obstruction and traffic.

• Ensure all compartments are closed and secured.

• Chock the wheels.

Содержание STAR 13 P









































































































































Результаты поиска

Содержание STAR 13 P

Отзывы:

Похожие инструкции для STAR 13 P

Бренды по названию

Популярные бренды

Haulotte Group STAR 13 P, Книга по эксплуатации

Результаты поиска

Содержание STAR 13 P

Отзывы:

Похожие инструкции для STAR 13 P

Бренды по названию

Популярные бренды