manualshive.com logo in svg

Haulotte Group H14T, Инструкция по эксплуатации и техническому обслуживанию, Страница: 51 / 78

Поделиться
Скачать
Haulotte Group H14T Скачать руководство пользователя страница 51

Operating and maintenance instructions - H14TX - HA16TPX

37

Caution!

Caution!

4.2.2 - Checks before using the machine

4.2.2.1 -Operation zone

• Ensure that the machine is on flat, stable and sufficiently resistant

ground  (see section 2.4 - floor pressure)

See table of characteristics for 

maximum authorised slopes.

• Ensure that no obtables can obstruct machine movement: 

- travel  (machine movement)
- turntable rotation
- telescoping and lifting: see "Working area" diagram. 

4.2.2.2 -General appearance

Photo 6: Rotation pin 

• Ensure that the pin blocking turntable rotation  (rep. 1, Photo: Rotation

pin, page 37)

 

has been removed.

• Visually inspect the whole machine: pay particular attention to paint

chips or battery acid leaks.  

• Check that there are no loose bolts, nuts, connections or hoses, no oil

leaks, no cut or disconnected electric conductors.

• Check the boom and platform: no visible damage, no signs of wear or

deformation. 

• Check that there no leaks, no signs of wear, impacts, scratches, rust

or foreign matter on the cylinder rods.

• Check that there are no leaks on the wheel reducers.
• Pump and hydraulic station; no leaks, components tight.
• Check that the wheel reducers are not disconnected.
• Check the tightness of wheel nuts and the degree of tyre wear.

These machines are not insulated 

and must not be used near electric 

lines.

4.2.2.3 -Electricity

• Check that the battery terminals are clean and tight: loose or corroded

terminals may result in loss of power.

• Respect battery manufacturer’s safety instructions.
• Check that the platform control panel power cable is in good condi-

tion.

• Check that the emergency stop devices are working properly. 
• Check that the tilt detector works properly (ref.19 , Photo: "Turntable"

control panel, page 35) by tilting the support plate. Beyond the maxi-
mum value, an alarm should sound if the machine is unfolded.

1

Содержание H14T















































































Отзывы:

Нет отзывов