background image

2L41C, 2M41, 2M41Z

Safety

HATZ

7

Operator’s Manual

3

Safety

3.1

General information

Introduction

This chapter contains the information you need to work safely with this ma-
chine.

To prevent accidents and damage to the machine, it is imperative that these
safety instructions be followed.

Read this chapter carefully before beginning work.

3.1.1

Intended use and foreseeable misuse

Intended use

The machine described in this manual fulfills the following functions:

▪ Diesel engine intended for installation in a machine or for assembly with

other machines to form a machine. See chapter 

11 Proof of quality, page

98

.

This engine is intended exclusively for the purpose specified and tested by
the manufacturer of the machine in which the engine is installed.

Any other use is not intended and therefore not permitted. Violations com-
promise the safety of the personnel working with the machine. Motorenfabrik
HATZ does not accept any liability for damage resulting from this.

The operational safety of the machine is only guaranteed if it is used as in-
tended.

The intended use also includes observance of the instructions in this Opera-
tor's Manual to preserve the environment, including in the appendix for the
model year 2019 as per EPA Nonroad Diesel Engines.

Foreseeable misuse

The following is considered to be foreseeable misuse:

▪ Any use that varies from or extends beyond the uses specified above.

▪ Failure to comply with the instructions given in this manual.

▪ Failure to comply with the safety instructions.

▪ Failure to immediately eliminate malfunctions that impact safety before

continuing work with the machine (working with the machine when it is not
in perfect condition, either functionally or in terms of safety).

▪ Failure to perform the necessary inspection and maintenance work.

▪ Any unauthorized modification of or removal of safety equipment.

▪ Use of spare parts and accessories that are unsuitable or have not been

approved by HATZ.

▪ Operation in flammable or hazardous environments.

▪ Operation in closed-off or poorly ventilated rooms.

Содержание 2L41C


















































































































Отзывы: