background image

2L41C, 2M41, 2M41Z

Operation and use

HATZ

33

Operator’s Manual

7

Operation and use

7.1

Safety notes

NOTICE

Comply with the safety chapter!

Follow the basic safety instructions in chapter 

3 Safety, page 7

.

WARNING

Danger of injury from damage and defects on the machine.

Do not take the machine into service if damage has been lo-
calized and identified.

Replace faulty components.

WARNING

Danger of injury from failure to follow the operating instruc-
tions and from performing unauthorized tasks on the ma-
chine.

Define the responsibilities of the personnel taking the ma-
chine into service.

Replace faulty machine parts immediately.

Check the installation conditions when the machine is first
taken into service and after the machine has been inactive
for a lengthy period.

CAUTION

Danger of engine damage from low load operation.

Operating the engine at no load or at very low load for an ex-
tended period can impair the running characteristics of the en-
gine.

Make sure that the engine load is at least 15 %.

Before switching off the engine following low load operation,
briefly operate it at a considerably higher load.

Содержание 2L41C


















































































































Отзывы: