Hatz Diesel 1B20 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 63

background image

A new HATZ Diesel engine - working for you

This engine is intended only for the purpose determined and tested by the manufacturer of the
equipment in which it is installed. Using it in any other manner contravenes the intended purpose.
For danger and damage due to this, Motorenfabrik HATZ assumes no liability. The risk is with the
user only.
Use of this engine in the intended manner presupposes compliance with the maintenance and repair
instructions laid down for it. Noncompliance leads to engine breakdown.
Please do not fail to read this operating manual before starting the engine. This will help you to avoid
accidents, ensure that you operate the engine correctly and assist you in complying with the mainte-
nance intervals in order to ensure long-lasting, reliable performance.
Please follow all maintenance references carefully including the schedule for Model Year 2015
EPA certified nonroad compression-ignition engines and for Model Year 2015 CARB certified
Heavy-Duty off-road engines to prevent our environment.
Please pass this Instruction Manual on to the next user or to the following engine owner.

Always have service work performed by qualified specialists. To this effect, we recommend that you
consult one of the 500

HATZ service stations

. There, your engine is repaired by staff who constantly

undergo training and who use both

original HATZ spare parts

and

HATZ tools

. The world-wide HATZ

service network is also available to you for consultation and spare parts supply.
For the address of your nearest

HATZ service station

, please refer to the attached list or the internet

under:

www.hatz-diesel.com

The installation of inappropriate spare parts may cause problems. We cannnot accept any liability for
damage or consequential damage resulting therefrom.
Thus, we recommend that you use

original HATZ spare parts

. These parts are manufactured follow-

ing the strict HATZ specifications and ensure, thanks to their perfect fit and function, maximum oper-
ating reliability. For the reference number, please consult the attached spare part list or the internet
under:

www.hatz-diesel.com

. Please take the complete spare parts kits in Table M00 into account.

We reserve the right to make modifications in the course of technical progress.

MOTORENFABRIK HATZ GMBH & CO KG

1

«
1
2
3
4
...
»

Содержание 1B20
































































Отзывы:

Нет отзывов

Похожие инструкции для 1B20

VLT AutomationDrive FC 300 Series

Бренд: Danfoss Страницы: 56

Бренд: Danfoss Страницы: 2

3T-MOTORS 3T45-20

Бренд: 3T-Components Страницы: 24

Бренд: Kober Страницы: 112

Бренд: Volkswagen Страницы: 64

Бренд: Robin Страницы: 63

Бренд: Rotax Страницы: 84

Бренд: Rotax Страницы: 166

Бренд: Honda Страницы: 139

Бренд: Honda Страницы: 64

Бренд: Honda Страницы: 84

Бренд: FPT Страницы: 49

Бренд: TJERNLUND Страницы: 3

Бренд: Volvo Страницы: 64

Бренд: Kärcher Страницы: 116

Бренд: MULTIPLEX modell Страницы: 11

Бренд: Chevrolet Страницы: 130

Бренд: LONCIN Страницы: 224

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды