65
– Remove oil filter from housing.
66
– Use an air line to blow out oil filter dirt from
the inside outwards.
Persons handling compressed air must
wear protective goggles. Never direct
the jet to animals, persons or yourself !
2445 / 10
67
– Check joint washer „1“ whether it is damaged;
replacement if necessary.
– Coat packing rings „1“ and „2“ slightly with oil
before assembly.
68
– Put in oil filter and press until limit stop.
– Check whether tension springs sit close to oil
filter with both ends „1“, before tightening
screw.
– Check the oil level and restore to the
max.
level if required, Chapter 4.1.1.
33
