manualshive.com logo in svg

Hatz Diesel 1B20, Оригинальная инструкция, Страница: 33 / 63

Поделиться
Скачать
Hatz Diesel 1B20 Скачать руководство пользователя страница 33

Cleaning the filter cartridge

Dry contamination

63

Use compressed air to blow through the filter
cartridge from the inside outwards, until no fur-
ther dirt emerges.

Important !
The pressure must not exceed 5 bar.

Persons handling compressed air must
wear protective goggles. Never direct

the jet to animals, persons or yourself !

Moist or oily contamination 

Renew the filter cartridge.

Checking the filter cartridge

– Check filter cartridge’s gasket surface „1“ for

damage, Fig. 63.

– Check the filter cartridge for cracks or any

other type of damage to the paper filter by
holding it inclined towards the light or by 
shining a light source through it. 

Important !
The slightest damage to the paper filter rules
out it being used any longer.

– Re-assemble the filter cartridge in the reverse

order of work.

2444 / 10

5.5.

Maintenance every 1000
operating hours

5.5.1. Cleaning the oil filter

The oil filter should be cleaned at the same time
as the engine oil is changed, since oil escapes
when the filter is removed.

The engine must be standing horizontally and
switched off.

Danger of scalding from hot oil !
Trap the old oil and dispose of it in 
accordance with local legislation.

64

– Loosen screw „1“ with approx. 5 rotations.

32

Содержание 1B20
































































Отзывы:

Нет отзывов