background image

13

Product Labeling

IND100077-110

Label Locations

Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below is seen 

from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation 

vs product size is drawn in. Due to space restrictions on selected units, some labels will be rotated 90 degrees to fit 

properly. The arrangement of labels may be shifted/stacked differently as it is based on factory options, such as; Touch 

Screen and Operating System (OS), but they will be grouped together where possible.

Label Positions

Notes

Applies for Product Range

Warranty label covers both 

screw and bends over edge 

(rear/side). Labels placed on 

rear and side.

HD 08T21 MMC-xxx-xxxx

Warranty label covers screw. 

Labels placed on rear and 

side.

HD 13T21 MMC-xxx-xxxx

Intel® Core™2 Duo CPU

Warranty label covers screw. 

Labels placed on rear and 

side.

HD 13T21 MMC-xxx-xxxx

Intel® Atom™ CPU

Warranty label covers screw. 

Labels placed on rear.

HD 12T21 MMC-xxx-xxxx

Содержание HD 12T21 STD-xxx-Fxxx



























































































Отзывы: