background image

EL-MF877-00                                                                                                Page  1 
Template Revision C  

Last revalidation date 18-March-2021 

                 

 

 

 

 

  

HPI instructions for this template are available at 

EL-MF877-01

  

                 

 

Product End-of-Life Disassembly Instructions 

Product Category: Monitors and DisplaysExternal Options

 

Marketing Name / Model 
[List multiple models if applicable.] 

HP M27fe FHD  Monitor 
HP M27fe FHD Monitor-NA 
HP M27fe 
HSD-0091-K 

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for 

the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE). 
 
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on 
the plastic part. For any questions on plastic marking, please contac

HP’s Sustainability Contact

.    

1.0

 

Items Requiring Selective Treatment

 

1.1 Items listed below are classified as requiring selective treatment. 
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as 
applicable. 

Item Description 

Notes 

Quantity of 
items 
included in 
product

 

Printed Circuit Boards (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq cm 

Display Board*1, Main Board*1

 

2

 

Batteries, excluding Li-Ion batteries. 

All types including standard alkaline, coin or button 
style batteries   

Li-Ion batteries.  Include all Li-Ion batteries if more 
than one is provided with the product (such as a 
detachable notebook keyboard battery, RTC coin cell, 
etc.) 

Battery(ies) are attached to the product by (

check all 

that apply with an

 

“x” 

inside the

 

“[ ]”):

 

[          ] screws 
[          ] snaps 
[          ] adhesive 
[          ] other.  Explain            
NOTE: Add detailed removal procedures including 
required tools in the sections 3.1 and 3.2. 

Mercury-containing components 

For example, mercury in lamps, display backlights, 
scanner lamps, switches, batteries             

Liquid Crystal Displays (LCD) with a surface greater 
than 100 sq cm 

Includes background illuminated displays with gas 
discharge lamps  panel*1 

Cathode Ray Tubes (CRT) 

            

Capacitors / condensers (Containing PCB/PCT) 

            

Electrolytic Capacitors / Condensers measuring 
greater than 2.5 cm in diameter or height 

 C605 in SPS board 

External electrical cables and cords 

 

HDMI cable*1, VGA cable*1, Power cord*1

 

3

 

Содержание M27fe






Отзывы: