Form No. HCWBIm-0913
5
MODEL DESCRIPTION
All Models
Hatco Hot/Cold Drop-In Wells are reliable and versatile. Each
unit has an insulated, stainless steel and aluminized steel
housing. For hot operation, an FR2 series Hydro-Heater is
mounted under the well and is designed to heat or hold foods
at safe temperatures between 140ºF and 190ºF (60° and 88ºC).
The Hydro-Heater features a tubular water chamber with a
spiral heating element wrapped around the outside. They
include a stainless steel front, powdercoated body, a low-water
cut-off system, and a convenient 3/4" Garden Hose Thread
(GHT) drain connection. For cold operation, the sides of the
internal well are completely surrounded with a copper
evaporator coil to provide even chilling from top to bottom.
Hatco Hot/Cold Drop-In Wells are designed, manufactured, and
tested to maintain safe food holding temperatures.
Controls for the Hot/Cold Drop-In Wells are housed in a single,
remote-mountable control enclosure. They include a three
position Power I/O (on/off) Switch, two digital temperature
controllers, and a drain status indicator light. The control
enclosure is connected to the condensing unit with a 4
′
(1219 mm) power cord and is connected to the Hydro-Heater
with a 6′ (1829 mm) flexible conduit assembly. Hot/Cold Drop-
In Wells are hardwired directly to a power source for a secure
and cord-free serving area.
all Hot/Cold Drop-In Well models are designed to be mounted
to the topside of various types of countertop material including
stainless steel, wood, Corian, and Swanstone.
Depending on the model’s pan capacity, each Hot/Cold Drop-In
Well is supplied from the factory with the proper size Water
Baffle and appropriate number/configuration of Pan Platforms
for hot operation as well as the appropriate number of 20″
(508 mm) Pan Support Bars for cold operation. Each individual
well is capable of holding a variety of pan combinations of full
size, 1/2-size, 1/3-size, and/or 1/6-size pans with additional
accessory Pan Support Bars.
Food Pans, Pan Support Bars, and a flush hose kit are available
as accessories for the Hot/Cold Drop-In Wells. Refer to the
OPTIONS aND aCCESSORIES section in this manual for
details.
HCWBI-6DA
HCWBI-2DA
HCWBI-3DA
HCWBI-4DA
HCWBI-5DA
HCWBI models
