No.:GC-JS-21 Version: 01/00
Effective date
：
2020-03-30
6
When an unexpected situation occurs during the use of the product, if the device alarms or other
abnormal conditions occur, please immediately cut off the power supply of the device, and check
and correct according to the "abnormal conditions" chapter of the manual.
Necessary monitoring shall be carried out in accordance with relevant national and regional
regulations. After putting the monitoring substance (such as chemical indicator or biological
indicator) into the equipment, run the corresponding program to monitor the sterilization effect,
and judge according to the result. If it fails, find the cause or contact the manufacturer.
A three-hole socket (220 ± 22VAC / 16A / 50Hz) must be used to ensure that the socket is reliably
grounded. Do not place the device where it is difficult to disconnect the power.
Do not use other power supplies with different voltages or frequencies.
Do not touch the plug and socket with wet hands.
Do not damage, modify, pull, excessively bend or twist the power cord, and do not place heavy
objects on the power cord.
Please do not place the sterilizer on an unstable workbench, such as a shaking table, a sloping
surface or a place where it will vibrate.
Do not block or cover the sterilizer door, vents or heat dissipation windows.
Please do not place anything on the sterilizer.
If the sterilizer is not used for a long time due to various reasons, the power cord plug should be
disconnected from the power supply and placed in a dry and cool place.
