138
User Manual Version 3.1
11.4.1
Sample settings for Ethernet connection
The tables below show sample settings for the different possible usages of the Ethernet
connection. Each table shows examples for the settings that have to be made in:
•
The printer menu.
•
The PC used to send data to the printer.
•
The printer driver on the PC used to send data to the printer. In order to make the
necessary settings, you need to a TCP/IP port to a printer driver.
11.4.1.1
Network connection between the printer (using a fixed IP) and the PC
Printer settings
PC settings
Printer driver settings
Port
number*
9100 Port
number
9100
IP
Address**
192.168.050.180 IP
Address
192.168.5.180
Subnet
Mask
255.255.255.000
Gateway
IP
Address
192.168.050.180
The PC must be
properly connected
to the same local
area network as
the printer.
* The default port 9100 is commonly used by printers. Please make
sure that this port is not blocked in your LAN or set to a port number
that is used in your LAN.
** The IP Address set in the printer must be valid in your LAN and
must be permanently assigned to the printer in your LAN. Please
contact your company’s network administrator for support.
11.4.1.2
Network connection between the printer (using a dynamic IP) and the
PC
Printer settings
PC settings
Printer driver settings
Port
number*
9100 Port
number
9100
IP
Address*
*
192.168.5.180
The PC must be
properly connected
to the same local
area network as the
printer.
