paper length measurement can be locally locked in the machine. Press the key
longer for paper length measurement and confirm.
Transporting of a single medium
•
Press the “pap” key. The medium found in the feeder is then fed in, trans-
ported under the printing unit, and then ejected.
•
When you press the “pap” key again, the paper transport is stopped. It can
also be halted by pressing the “start” or “test” keys.
5.5
Test Print
Change from the
Online mode
to the
Offline mode
by using the
Offline
key
.
1.
Place as many media in the feeder as you would like to use for a test print,
e.g. 1 medium.
2.
Confirm with the
Quick
+
Test
key. The test print is carried out. Press the
key again, in order to stop the procedure.
3.
Using the test print, check the position , the orientation and the quality of the
print on the medium.
In the event that there is too much pressure from the dosing rolls on the print ob-
ject:
•
Reduce the pressure from the separating fingers by turning the positioning
axes clockwise.
5.6
Machine Counters
Three different Counters are installed in this machine:
5.6.1
Day Counter
Each printout after the paper is ejected will be counted and the value is readable in
the right upper area.
This counter includes the “Job” and the “Service” printouts.
After powered off and on the machine, the counter is reset.
5.6.2
Service Counter
A test page count contains the number of
Test
prints with the accompanying paper
ejection.
This count is carried out with the activation of the "TEST" key or several “Service”
printouts, with the machine in the offline condition.
5.6.3
Counting of Job Pages
A job page count contains the number of data printouts received by the computer
with the accompanying paper ejection.
This count is carried out with the machine in the online condition.
When you continue data transmission with printouts, counting is resumed.
All counters are reset when the machine is switched off!
41
