Operations manual H1281
HASCO hot runner 57
When touching the display field for the alarm limit value, the known num-pad opens,
where you can enter the desired new limit value. The actual value is displayed in the
field and will be updated after the modification. The limit value is added to the actual
setpoint value :
Example:
Setpoint Zone 1 = 200°C , Limit value = 50°C°, means load shedding at 250°C
After having finished, close the menu with the red cross.
Attention :
The safety loadshedding alarm (total heating switching off at high temperature in the
mould) can only be altered for operators with user right level „administrator“, see also
description on page 17.
For all other users, the key is locked, see also example on page 33.
Temperature alarm :
When pressing the key „Temparature alarm“, the following dialogue window opens :
Safety alarm
Temperature
Limit below setpoint °C
Limit above setpoint °C
