--9--
DIRECTION OF SPINDLE ROTATION
Open the lid of the saw guard and remove
the nut, the flanges and the saw-blade (see
chapter CHANGING THE SAW-BLADE)
Put the motor in the highest position. And
close the lid.
PROPER DIRECTION IS
CLOCKWISE
(looking from the spindle to
the motor housing (fig. 5).
1 Switch motor on and off.
2 Check if direction is clockwise.
3 Assemble saw-blade, flanges and nut
(see chapter CHANGING THE SAW-
BLADE).
WRONG DIRECTION IS ANTI
CLOCKWISE
(looking from the spindle to
the motor housing)
1 Switch motor on and off.
2 Direction is anti clockwise.
3 Disconnect the mains supply.
4 Open the switch box.
5 Interchange two phases.
6 Close the switch box.
7 Connect the mains supply.
8 Check rotation again before mounting
the saw-blade.
9 Assemble saw-blade, flanges and nut.
10 Close the lid of the saw-guard.
