--12--
OPERATING THE MACHINE
RIPPING
SAFETY
When ripping solid wood, put het saw-
blade as high as possible (fig. 8).
The sub-fence max. 10 mm pas the point
where the blade cuts the wood at full
height.
Adjusting the sub-fence properly prevents
the return shock of the wood or a part of
it.
Good support of the parts to be cut or
already cut is necessary.
When cutting small wood use a pushing
stick.
Adjusting the saw-guard.
1 Adjust the rip fence with the sub-fence
at the desired measure (fig. 9).
2 Check if the saw-blade can rotate freely.
3 Switch on the motor.
4 After cutting switch off the motor
immediately.
5 Remove the material after the saw-blade
has stopped.
Notice: When cutting small wood use a
pushing stick (fig. 10).
Notice: If the saw-blade stops because of
clamping of the wood, switch off the motor.
Hold the piece of wood tightly.
Notice: Never stand in the line of the saw-
blade. In case of a return shock you might
get hit.
