--3--
APPLIANCE
The saw bench type HVS is only to be used
for cutting wood and wood-like materials.
The cutting of other materials is not
allowed.
Maximum panel sizes are:
Height:
120 mm
Between saw-blade and fence:
760 mm
Length (not supported):
1000 mm
Cutting of material, which needs removal of
protections, is not allowed.
All other appliances except for the above
are improper use of the machine and
therefore prohibited. The producer cannot
be held responsible for damage as a result
of improper use. Damage will be recovered
from the user.
Proper use of the machine also implicates
following the instructions of the
manufacturer concerning use, maintenance
safety, replacing spares and electrics etc.
The machine may not be operated, used or
maintained by persons not acquainted with
the risks of the machine.
Permission for operating, using and
maintaining the machine have to be clearly
described by a person or persons
responsible within the organisation.
Maintenance has to be performed by the
manufacturer or customer service.
One has to be informed about and comply
with the country’s safety regulations.
Only original Harwi parts are to be used,
except the saw-blade. We cannot give
warranty or be held responsible for damage
caused by using non-original Harwi parts.
The manufacturer cannot be held
responsible for damage caused by changes
made to the machine by the user.
REMAINING RISKS
If the machine is used completely
according to all safety regulations there
still will remain some risks.
- Touching of the saw-blade
- Touching of the saw-blade when the
guard is removed.
- Breaking of the saw-blade or parts of it
hurtling out of the guard.
- Touching of parts under voltage while
junction box or switch is opened.
- Damage to the hearing by constant use
of the machine without ear protection.
- Throw out of harmful dusts or vapours
by using a dust extractor with bad
performance of no dust extractor at
all.
