Step 14 - Fit the shelves
Parts:
Mesh shelves
2 x shelf support per shelf
4 x cable tie per shelf
Slide the square nuts for the 13mm water
pipe to the middle of the crossbars on the le
hand side of the frame, before you insert the
shelf supports.
Slot the shelf supports into the slots on the inside of the
side panel cross bars, inserting them at a diagonal and
then straightening up.
Place the mesh shelves onto the shelf supports and secure
with cable ties, one in each corner.
NOTE:
The mesh shelf with a
slot cut out goes in the top
level to allow the lid li er
piston to swing clearly. The
front shelf support goes in
upside down.
