Step 3 - Assemble the base
Parts:
1 x front assembly
1 x rear assembly
2 x side base 45cm
This step is best done on a flat surface where you can
easily access the screws at the bottom, such as a table or
workbench.
Link the front and rear
assemblies using the 45 cm
side base parts.
The closed faces on the
assembly uprights face
outside
the greenhouse.
The side base parts have
the single channel facing
up
, and the double channel
facing
down
.
Slot the assemblies over the
screws on the side base parts
and tighten.
