Instructions for installation and use
p. 6/34
2.2. Safety information for the installer
●
Installing and connecting the sauna heater may only be performed
when the power supply is disconnected.
● Installation may only be performed by a qualified electrician or
similarly qualified person.
●
A fully disconnecting all-pole isolating device compliant with
overvoltage category III must be fitted on site.
●
Always use silicone cables that are heat-resistant up to 150 °C
to connect the sauna heater.
●
Only install one sauna heater in the cabin. The Concept R mini
combi sauna heater must not be used together with other sauna
heaters in a sauna cabin.
●
The roof and walls of the sauna cabin must be manufactured
from low-resin, untreated or thermally treated wood, e.g. Nordic
spruce, hemlock, pine or fir, or from laminated wooden materi
-
als. If laminated wooden materials are used, make sure that the
adhesive used in them does not produce formaldehyde. If other
materials than wood are used in the sauna cabin, these materi-
als must be heat-resistant and corrosion-resistant and must not
cause any negative effects on the health of the sauna users.
●
The height of the sauna cabin must be at least 1.64 m.
● Observe the specifications on volumes and on ventilation of the
sauna cabin in chapter
10. Technical data
.
●
When positioning the sauna heater, observe the minimum safety
distances (see chapter
4.2. Safety intervals
).
●
Also comply with the regulations applicable at the installation
location.
●
For your own safety, consult your supplier in the event of prob-
lems that are not explained in sufficient detail in the installation
instructions.
Содержание CP-RMC-60
