10
Case LB334/434 & New Holland Big Baler Series (MY2020 and Prior) (continued)
Scroll through the Menu bar until the INFORMATION icon (5) is visible. Press the INFORMATION button so
the Information page appears. Verify that the controller software loaded to the baler is version 4.2.0.0 or
higher. If not, contact the dealer to update firmware in Baler Control Module (BCM). If the controller software
displays version 4.2.0.0 or higher proceed to configuring the baler for the moisture system by pressing the
MACHINE SETUP button (6).
Once the MACHINE SETUP icon has been selected, the Machine Setup page will appear, and the icon will be
backlit in orange. Press the MACHINE SETUP icon (7) again to go to the second page of the Machine Setup.
The second page of the Machine setup is identified by the three gray buttons in the Menu Bar. Press and
hold the third gray button (8) for 10 seconds or until the display switches to displaying Dealer Mode.
7
6
8
4.2.0.0
5
