13
Operation
(continued)
Dye Marker System
When using the dye marker turn on the setting as
shown and select the desired moisture to mark a bale.
*Bales at or above this moisture level will be marked.
Dye Marker icon will now appear on the home screen.
The last bale moisture will be highlighted in red and
the bale will be marked at or above the set moisture.
Dye Marker Notes
•
When the Dye Marker is activated by the moisture setting it will spray 3 seconds once per End of Bale (EOB)
cycle. After an EOB signal the dye marker is then reset to be able to spray again for 3 seconds once on the
next bale.
•
A full tank of dye is estimated to mark 50-60 bales.
Dye Marker Override
If you want to mark a bale for any reason, press the bale icon to activate the sprayer. The icon will turn green.
*When the manual override is used, the last bale moisture will not highlight in red.
The manual spray function can be used on a bale as many times as preferred in 3 second intervals.