Hartzell HC-E4 3 Series, Руководство пользователя

Страница: 35 / 308

Propeller Owner’s Manual
147
INTRODUCTION
61-00-47
Page 1-9
Rev. 16 May/20
5. Personnel Requirements
(Rev. 1)
A. Service and Maintenance Procedures in this Manual
(1) Personnel performing the service and maintenance
procedures in this manual are expected to have the
required equipment/tooling, training, and certifications
(when required by the applicable Aviation Authority) to
accomplish the work in a safe and airworthy manner.
(2) Compliance to the applicable regulatory requirements
established by the Federal Aviation Administration (FAA)
or international equivalent is mandatory for anyone
performing or accepting responsibility for the inspection
and/or repair of any Hartzell Propeller Inc. product.
(a) Maintenance records must be kept in accordance
with the requirements established by the Federal
Aviation Administration (FAA) or international
equivalent.
(b) Refer to Federal Aviation Regulation (FAR) Part 43
for additional information about general aviation
maintenance requirements.
6. Special Tooling and Consumable Materials
(Rev. 1)
A. Special Tooling
(1) Special tooling may be required for procedures in this
manual. For further tooling information, refer to Hartzell
Propeller Inc. Illustrated Tool and Equipment Manual
165A (61-00-65).
(a) Tooling reference numbers appear with the prefix
“TE” directly following the tool name to which they
apply. For example, a template that is reference
number 133 will appear as: template TE133.
B. Consumable Materials
(1) Consumable materials are referenced in certain sections
throughout this manual. Specific approved materials
are listed in the Consumable Materials chapter of
Hartzell Propeller Inc. Standard Practices Manual 202A
(61-01-02).