HART HPBB34, Руководство оператора

Страница: 6 / 20

6 – English
MAINTENANCE
NOTE: ILLUSTRATIONS START ON PAGE 7
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
To reattach:

Insert the roller brush into the beater bar assembly.

Align the tabs on the cap to the notches on the assembly
and firmly press the cap into place.
NOTE: Make sure the opposite end of the roller brush is
aligned to the drive spindle when pressing the cap into
the assembly housing.

Turn the end cap clockwise until it clicks into the locked
position.
CLEANING A JAMMED BRUSH ROLL
The brush roll is designed to stop spinning if it becomes
jammed with debris.
To reset:

Turn hand vacuum
OFF
and remove the battery pack.

Remove roller brush as described Removing the Roller
Brush for Cleaning .

Inspect roller brush and its end caps for any obstructions.
Clear obstructions if present

Reinstall the roller brush.

After the motor has cooled for 30 seconds, reinstall the
battery pack to resume vacuuming.
CLEANING/REPLACING THE FILTER
See Figures 4 and 8, page 8.


Remove the battery pack.


Remove dust bowl from hand vac. Pull to remove filter
housing and filter from dust bowl.
  Turn the filter counterclockwise to remove from filter
housing. Turn clockwise to lock in place.


Remove the filter from filter housing. Shake or lightly brush
any dust or dirt off the filter.


Shake or lightly brush any dust off the filter housing. Wash
if necessary.
  Empty the dust bowl; wash if necessary. Before
reattaching to the hand vac, make sure all pieces are
completely dry.
NOTE:
Allow 24 hours for parts to dry completely.
When purchasing replacement filter, request recommended
part number HAHV33.